Steering wheel main nut

Post by **bigginger** » Fri Jul 14, 2006 1:40 pm

Ah, neighbours. Aren't they great? Mine are away at the mo, so LOTS of grinding and wire brushing going on...

Post by **RogerRust** » Fri Jul 14, 2006 7:30 pm

Easy I've just checked. Undo the three little screws that hold the shroud on wiggle it round a bit and undo the big screws Job done!

Want to know the secret????

.
.
.
.
.
.
.
.
.
Undo the pinch bolt at the bottom of the steering column and move the whole steering wheel up a bit first.
I had to do it that way because I didn't have a big socket!!

Post by **Kevin** » Sun Jul 16, 2006 10:03 pm

Well thats another trick leant.

Post by **Welung666** » Sun Jul 16, 2006 10:24 pm

RogerRust wrote:I had to do it that way because I didn't have a big socket!!

Do you have a centre punch? I don't have a large enough socket either thats why Phoebe has a centre punch mark on her steering wheel nut

Post by **Kevin** » Sun Jul 16, 2006 11:47 pm

Do you have a centre punch?

I have seen the damage that has been caused by a centre punch when used by the untrained and even worse chisel damage