Exhaust Mountings

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Chris Morley
Moderator
Moderator
Posts: 898
Joined: Mon Feb 11, 2002 12:00 am
Location: Berkshire
MMOC Member: No

Post by Chris Morley »

Yes. these are the only two points.

I've always wondered 1) why the original exhausts weren't in two parts and 2) not supported somewhere near the crossmember.
Top
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

Mine was fixed under the front of the rear seat (by a strap to the angled section of floor) and again on the boot floor (just behind the rear valance).
Top
57traveller
Minor Addict
Posts: 804
Joined: Fri Apr 16, 2004 8:58 am
MMOC Member: No

Post by 57traveller »

Mine are the same Cam, 2 flat strips of thick rubber clamped to pipe and bolted through floor under front seat and boot. Different lengths so don't mix up I did once and the tailpipe was too low.
Top
Willie
Minor Legend
Posts: 3204
Joined: Tue Feb 12, 2002 12:00 am
Location: S E London
MMOC Member: No

fittings

Post by Willie »

Andyb1... you will,or should, find the hole for the middle
exhaust strap on the floor close to the rear seat
support upright. There is a shaped washer which goes
underneath to clamp the flexible strap without chafing
through it.
Willie
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
Top
Post Reply

Return to “Mechanical”