Windscreen Washers

Post by **hallbt** » Sun May 21, 2006 11:51 am

Morris Traveller 1969 G Reg [Kings Langley Herts]
Had car many years did a little restoration but now starting again in earnest.
The washer doesn't work, hand pump on dash and tubing seem OK. however the supply pipe simply sticks into the bottle. Should there be a non-return valve/ filter etc at this point? I'm sure there should. does anyone know a supplier?
Thanks

Brian

Post by **Welung666** » Sun May 21, 2006 12:40 pm

One of those? £1.95 from ESM

Hope thats a help

Lee

Post by **hallbt** » Sun May 21, 2006 12:46 pm

Welung666 wrote:

One of those? £1.95 from ESM

Hope thats a help

Lee

Lee,
Many thanks and their carriage rates are reasonable, Brian

Post by **Welung666** » Sun May 21, 2006 12:49 pm

For a small item like that (call them to double-check though) it's just first class post.

Lee

Post by **bigginger** » Sun May 21, 2006 1:21 pm

Or get some other things you'll need too - orders over £60 or £70 have free carriage.

Post by **Welung666** » Sun May 21, 2006 7:20 pm

£60 is the free carriage break point.... I didn't realise when I ordered new brake cylinders for Phoebe and the carriage took it just under £60

Oh well!

Post by **Stig** » Mon May 22, 2006 2:54 pm

Mine used to have a little tapered brass tube with a tiny glass bead in it as the non-return valve but the glass bead kept working its way up the flexible pipe so I replaced it with that very plastic thingy illustrated above. Used to have to pump it repeatedly to finally get a squirt but now one pump = one squirt.