rear cylinders

Post by SR » Mon Apr 24, 2006 8:25 pm

as per manual ,do u really have to remove the hub to change cylinder or can it be wiggled out with some wiggling action/face pulling

Post by **rayofleamington** » Mon Apr 24, 2006 8:55 pm

it comes out without removing the hub!! (are you using a haynes manual?)

Some are easier than others, but if having problems, give it a whack with a hammer! Unlike the rear screen ;-) this is a really good way to cure it

Post by SR » Mon Apr 24, 2006 9:10 pm

cheers ray

Post by **bmcecosse** » Tue Apr 25, 2006 1:31 pm

But it may actually be easier to just pop the hub off.

Post by **rayofleamington** » Tue Apr 25, 2006 4:37 pm

But it may actually be easier to just pop the hub off.

I've never found it that difficult to use a hammer for a split second.

Post by **bmcecosse** » Tue Apr 25, 2006 6:37 pm

Sometimes they still don't want to come out and play!

Post by **rayofleamington** » Tue Apr 25, 2006 7:39 pm

Sometimes they still don't want to come out and play!

I guess I've been lucky on my 15 Minors - they all came out OK.