Morris Minor Owners Club

agree 20w/50

Hi Richard VERY Kind of you! sadly Bergerac is a little too far :lol: I have seen a tap on ebay I was thinking of buying & having ago, alternatively moss has a 5/8" sender for a fiver, do you think that would work with an elec gauge & then I just put the sender that was sent into stock!...

Hello Richard, Thankyou for that, Yes the sender is 1/8npt, thats my problem!

Hi, I'm trying to find a housing/adaptor to fit in the cylinder head near the thermostat. At the moment there is a blanking plug, my idea was to remove that, fit an adaptor & sender for a temp gauge, failing that, any other ideas on where to fit the sender. I've looked on esm, bull & charles...

General tool kit is fine , selection of drivers,grips, side cutters, pliers, feeler gauge,plug spanner,adjustable spanner, set of spanners up to 3/4, torch,you know the sort of thing. The odds & ends are worth a thought, tape, bits of wire, cable ties,bit of emery paper, jubilee clips, odd bits ...

Hi everyone, gauges have arrived & thee is no mention of what voltage. Each has 3 terminals + , - , s. Obviously s is sender & - is neg earth, For the pos, is it best to try the 10v first? & where on the speedo gauge would it go?
Thanks

Try bull motif spares @ www.morrisminorspares.net

good luck

Thanks so far, I'll know more when the gauges arrive, I was just thinking to get the adaptors so I was ready to go when they did!

Hi, Thanks for that, the gauges are electrical & the thread size of the senders is 1/8 NPT, I'll get a T piece for the oil gauge that means its 1/8npt 2 females & a male, re the water gauge, guessing!! by the size of the head of the blanker 5/8 sounds more likely than 3/8's. I'll order one o...

Hi, I've ordered a oil pressure & water temp gauge, would like to get the adaptors ordered ready, does anyone know the thread size of the oil sender (the one near the back of the block(67 traveller) also the thread size of the blanking plug at the front of the head nr the thermostat housing. Tha...

Update, Got the new cylinder fitted & as you say pipe joining the two cylinders was difficult, gave it all a good soaking in penners & even then the end of the joining pipe I wanted to undo would not shift, luckily the other end came undone, so I removed the seized cylinder complete with pip...

Hi, I've received my new cylinder & intend to fit today, its for the front left, Am I right in thinking I should be able to replace the seized one & just bleed that wheel, ? All other wheels are ok, but I did notice front right drum seems loose with just one grub screw, so I'm fitting the ot...

it was a joke, ! ! have enough plastic cards to tile a bathroom,albiet small!
Sadly we don't get free postage to France,for any amount but yes we do get a little discount over certain amounts

Hopefully!! an ap lockheed from esm plus a couple of other bits, they ought to do a loyality card!!

Thanks, stuck left front cylinder, new one on its way!

Thanks for that, I'll check the left front wheel

Hello everyone, yeah brake topic again! So new to me 67 traveller, poor brakes & pulls to the right on braking.No leaks. I've adjusted all wheels & have a pull to the right, do I need to adjust the left front? 2nd I'm going to get new mintex shoes front & back, seeing as a lot of you rat...