Morris Minor Owners Club

Can not remove tie rod no access to split pin any tips

Need help the track end rod will not pop out of the steering arm any tips

Thanks for all your help the diagram with the numbers has made it very clear and I'm sure ill be bugging you soon

Thanks for the help bmc I'm trying to replace 27 and 43 but I'm now thinking I've done 27 wrong I've put a poly bush on there

Number 40 lower trunnion and I'm replacing rubbers with poly

Hi I'm having a problem getting the wishbone tie-bar off does the slotted nut have a split pin because I can't get it to budge. Also I can't get the lower left hand link off it turns both ways to a point then it won't budge I only want to replace the rubbers.

Hi all I want to change the pull start to a push start anyone know how

Hi all how do you release the stater pull I've followed the pull cable and it's joined to a box with two screws do I do it from there I want to take off all the switches

Original set up

Hi all running a 1275 mg midget engine and I'm really not impressed very slow but I'm swapping the box out for a t9 soon . Anyone know what's in the gearbox conversion kit the price is crazy

What is the procedure do they have to be drained or just top of with the new fluid

What type of oil can I use in the shock absorber?

This is happening when I pull off from the lights and traffic from a stop

It's hard to get into first and it always clunks all other gears are fine as long as I double clutch but fir is a real embarrassing problem. As people are always looking at the car and then comes the noise. Once again help please

Thanks for all your help guys

Does anyone know if the disc and hub assembly from a mg midget would go straight on a Morris ?

Yes the brakes work but the when the pedal sinks to the floor then there are no brakes

When I press the brake the pedal brakes as normal and then disappears what could be the problem I've checked the brake oil level and it's a 1/4 full down the tube if I put my finger in there. Also I've checked the brake shoes and there fine I did try to raise the pads but couldnt find the screws to ...

Was going two to three times then stops took motor out cleaned old grease out sprayed everything with wd40 put back in and nothing moves now when put back

Any idea whats in these kits the price is very high can the items be bought separate for cheaper