The bonnet and boot on my 1952 MM convertible have very dull, almost matt, original paintwork (see attached photos). I have tried manually polishing both several times with various polishes (Autoglym, Meguars etc), but the difference is minimal and my fingers ached! The photos show rain spots and it does need a wash, but even so, the paint is much duller than the wings and rest of the car.
I have done some research and it seems a dual-action (random orbital) polisher is what I need but I would welcome any advice on the appropriate tool or brand to use.
Which polisher?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Mr Spigot
- Minor Fan
- Posts: 410
- Joined: Mon Sep 13, 2021 2:44 pm
- Location: Eastbourne, Sussex
- MMOC Member: Yes
Which polisher?
- Attachments
-
- 08dc75c5-aa6f-4baa-9ca4-6d634b979fa3.jpg (35.94 KiB) Viewed 146 times
-
- 7bec5a71-bcf3-43d3-87f2-2bdcbbacf9a6.jpg (36.07 KiB) Viewed 146 times
1960 2 door 'Mostyn' - 1275 Midget engine - WOI 577 - owned since 1990
1952 MM convertible 'Mawdie' - 918 SV engine - MWD 305 - owned since 2023
1952 MM convertible 'Mawdie' - 918 SV engine - MWD 305 - owned since 2023
-
alanworland
- Minor Legend
- Posts: 1462
- Joined: Tue Jan 30, 2007 10:09 pm
- Location: Essex
- MMOC Member: No
Re: Which polisher?
I bought one from Argos, a Challenge unit with variable speed. I've used it several times and it does a good job.
You choose the fierceness with hard/softer pads and compound, I've only used farecla G3 compound, which is fine/gentle followed by a G3 wax.
Definitely takes the effort out of the job with good results.
Alan
You choose the fierceness with hard/softer pads and compound, I've only used farecla G3 compound, which is fine/gentle followed by a G3 wax.
Definitely takes the effort out of the job with good results.
Alan
