- 20240914_143956.jpg (1.56 MiB) Viewed 577 times
Oil pump
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 501
- Joined: Wed Feb 04, 2009 6:49 pm
- Location: Frome
- MMOC Member: No
Oil pump
Oil pump needed for 1098 with this type of drive and 3 bolts. Asap.
---------------------------------------------------------------------------------------------
1956 Traveller - work in progress
1956 Traveller - work in progress
-
- Minor Maniac
- Posts: 11236
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Oil pump
David
This is the pump you need for your application:-
https://www.minispares.com/product/Clas ... o%20search
If you have the old pump with a spade drive shaft you could always swop the drive shafts.
This is the pump you need for your application:-
https://www.minispares.com/product/Clas ... o%20search
If you have the old pump with a spade drive shaft you could always swop the drive shafts.
-
- Minor Addict
- Posts: 501
- Joined: Wed Feb 04, 2009 6:49 pm
- Location: Frome
- MMOC Member: No
Re: Oil pump
Good to get conformation thanks Phil.
I've found a mini spares company called Somerford mini, Calne that are only 45mins from me so I'll probably take a day off next week and pick it up. Might take the engine with me to be 100% and incase I need anything else although I think I've put everything back on except the oil pump.
I've found a mini spares company called Somerford mini, Calne that are only 45mins from me so I'll probably take a day off next week and pick it up. Might take the engine with me to be 100% and incase I need anything else although I think I've put everything back on except the oil pump.
---------------------------------------------------------------------------------------------
1956 Traveller - work in progress
1956 Traveller - work in progress
-
- Minor Maniac
- Posts: 11236
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Oil pump
David
For your application the pump must not have a central boss around the drive shaft. The forward face of the pump must be perfectly flat with only the spade drive shaft poking through.
Make sure that the oil pump cover will fit over the new oil pump as pump heights can vary.
Phil
For your application the pump must not have a central boss around the drive shaft. The forward face of the pump must be perfectly flat with only the spade drive shaft poking through.
Make sure that the oil pump cover will fit over the new oil pump as pump heights can vary.
Phil
-
- Minor Addict
- Posts: 501
- Joined: Wed Feb 04, 2009 6:49 pm
- Location: Frome
- MMOC Member: No
Re: Oil pump
I'll take the backplate with me as well, including pump cover.
---------------------------------------------------------------------------------------------
1956 Traveller - work in progress
1956 Traveller - work in progress