Oil pump

[davidpidge]

20240914_143956.jpg (1.56 MiB) Viewed 609 times

Oil pump needed for 1098 with this type of drive and 3 bolts. Asap.

[philthehill]

David
This is the pump you need for your application:-
https://www.minispares.com/product/Clas ... o%20search
If you have the old pump with a spade drive shaft you could always swop the drive shafts.

[davidpidge]

Good to get conformation thanks Phil.
I've found a mini spares company called Somerford mini, Calne that are only 45mins from me so I'll probably take a day off next week and pick it up. Might take the engine with me to be 100% and incase I need anything else although I think I've put everything back on except the oil pump.

[philthehill]

David
For your application the pump must not have a central boss around the drive shaft. The forward face of the pump must be perfectly flat with only the spade drive shaft poking through.
Make sure that the oil pump cover will fit over the new oil pump as pump heights can vary.
Phil

[davidpidge]

I'll take the backplate with me as well, including pump cover.