Hi,
So I have converted to a type 9 gearbox still running the standard Speedo, currently driving in 2nd gear around 20mph+ through each gear I'm reading 140mph on the Speedo or the needle is spinning around until it hits the pin that it rests on.
Is there a fix for this or an issue that has caused this to happen?
(This happened after sitting at 60-70mph on the motorway)
T.i.a
Speedo issues
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 23
- Joined: Sat Aug 21, 2021 2:09 pm
- MMOC Member: Yes
Speedo issues
Quantum
-
- Minor Legend
- Posts: 1063
- Joined: Tue Nov 08, 2016 3:18 pm
- Location: Manchester ( Damp and Miserable ) and that's just the wife...
- MMOC Member: Yes
Re: Speedo issues
Probably a bit of muck between the driving magnet and the driven plate in the speedo... negating the magnetic drive to a fixed drive..
A good clean, if you're proficient, would help..
John ;-)
A good clean, if you're proficient, would help..
John ;-)