Hoses
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 685
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Hoses
Can you please advise if the heater hoses through the bulkhead are half inch please.
-
- Minor Maniac
- Posts: 10881
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
-
- Minor Addict
- Posts: 685
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Hoses
Fab thank you.
Re: Hoses
Unless you have got an upgraded heater, in which case they may be 5/8. Easy to recognise as typically have reducers to take them back to half inch to connect to the tap and metal return pipe.
- svenedin
- Minor Legend
- Posts: 1960
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Hoses
It's actually the same I.D as standard garden hose so it means you can connect a garden hose to the heater tap if you want to flush out the block.
If you buy the hoses from ESM they are silicone, excellent quality and look original too.
Stephen
If you buy the hoses from ESM they are silicone, excellent quality and look original too.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
- Minor Addict
- Posts: 685
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Hoses
Thanks very much
-
- Minor Fan
- Posts: 254
- Joined: Tue Oct 26, 2010 9:01 pm
- MMOC Member: No
Re: Hoses
I have just replaced mine with a new set fro ESM. Excellent set. It was a bit fiddly under the dash but I did it OK. Use good quality Jubilee clips.
1969 Traveller in Almond green. Owned since 1979.