Flywheel locking tool.

You can use this area to advertise parts.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
philthehill
Minor Maniac
Posts: 10882
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Flywheel locking tool.

Post by philthehill »


Sleeper
Minor Legend
Posts: 1063
Joined: Tue Nov 08, 2016 3:18 pm
Location: Manchester ( Damp and Miserable ) and that's just the wife...
MMOC Member: Yes

Re: Flywheel locking tool.

Post by Sleeper »

Thanks Phil...

I know what my job is for this afternoon.

John ;-)
Sleeper
Minor Legend
Posts: 1063
Joined: Tue Nov 08, 2016 3:18 pm
Location: Manchester ( Damp and Miserable ) and that's just the wife...
MMOC Member: Yes

Re: Flywheel locking tool.

Post by Sleeper »

Sorted..

)
stay.jpg
stay.jpg (1.02 MiB) Viewed 1120 times
John ;-
philthehill
Minor Maniac
Posts: 10882
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Flywheel locking tool.

Post by philthehill »

That was quick 8)
Well done. :tu1:
This is what I use - Sykes Pickavant locking tool.
Flywheel locking tool 1.jpg
Flywheel locking tool 1.jpg (81.02 KiB) Viewed 1114 times
Flywheel locking tool 2.jpg
Flywheel locking tool 2.jpg (83.07 KiB) Viewed 1115 times
There is no need to use both bolt holes - once in place the turning motion of the flywheel tightens the locking tool to the flywheel. The use of one bolt also allows the locking tool to be easily swung out of place if need be.
I also have one of the early Sykes Pickavant flywheel locking tools (see below) as I am a sucker for collecting tools especially those I used way back when I was working in the BMC garage. I had to pay a bit more thane the £2.8.0 though. :-(
Flywheel locking tool.jpg
Flywheel locking tool.jpg (249.6 KiB) Viewed 1109 times

Sleeper
Minor Legend
Posts: 1063
Joined: Tue Nov 08, 2016 3:18 pm
Location: Manchester ( Damp and Miserable ) and that's just the wife...
MMOC Member: Yes

Re: Flywheel locking tool.

Post by Sleeper »

You old bugger , we went decimal 50 years ago today..

John ;-)
Post Reply