Rack damper pad
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 470
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Rack damper pad
Has anyone got any idea of the diameter of the racks primary damper pad please.
-
- Minor Fan
- Posts: 470
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Re: Rack damper pad
I just need an idea so that I can get the material before I remove the rack, I don't want to purchase bar which is way over size.
Re: Rack damper pad
15mm should cover it. I had to get one made, couldn’t find a supplier who stocked them.
Re: Rack damper pad
The Service Parts List, plate MJ2 refers to the Pad Damper, ACA 5244, is this the part to which you refer?
Without removing the damper from a rack. you could get an idea of size by measuring the housing.
Without removing the damper from a rack. you could get an idea of size by measuring the housing.
-
- Minor Fan
- Posts: 470
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Re: Rack damper pad
Thanks gents, I have some 15mm, it wont take long to make one.