Trafficator switch

[hammersmith]

Hi,
My Trafficator had been working up to week ago, but they started to fail. On taking the switch out from under the dash through the glove box, I discovered on taking it apart it was corroded. I have purchased a new one from a MM supplier. On trying to connect it I had power from the live wire from the cars wiring. I used a bulb tester. Power was going to the left indicator but no power from the wire for the right indicator. Can any offer an advice please.

[StillGotMy1stCar]

With your tester bulb, make sure you have the supply going to the terminal marked F, it is possible you have connected the supply to the L terminal, if so they just need swapping over.

Regards John

[hammersmith]

Hi John,
Many thanks and yes that you were right.
Both working ok.
Mike

[StillGotMy1stCar]

Glad to be of assistance.
Thanks for letting us know the outcome, so many times a thread comes to a dead end.

Regards John