BEG STEEL BORROW BUY DRIFT

If you need something, try asking for it here - you never know
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
NETTIE
Minor Friendly
Posts: 61
Joined: Sat Jun 25, 2022 5:54 am
MMOC Member: Yes

BEG STEEL BORROW BUY DRIFT

Post by NETTIE »

Hi guys looking for a valve guide drift please
THOSE WHO NEVER DO ANYTHING WRONG NEVER DO ANYTHING
philthehill
Minor Maniac
Posts: 9531
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by philthehill »

Do you have access to someone with a lathe.
The measurements are in the wksp manual if they can turn one up for you.
Valve guide tool 1.jpg
Valve guide tool 1.jpg (20.82 KiB) Viewed 212 times
I tend to press out the valve guides as then there is no distortion of the guide and I have a guide stop to ensure that all guides are the same height.
Valve guide tool 2.jpg
Valve guide tool 2.jpg (85.42 KiB) Viewed 212 times
When you fit the valve guides I would recommend fitting the top hat seals to the inlet valve guides. You will need the special valve guides from ESM:-
https://www.morrisminorspares.com/engin ... l-p1209547
https://www.morrisminorspares.com/engin ... pe-p830169
If you get stuck PM me.
Phil

NETTIE
Minor Friendly
Posts: 61
Joined: Sat Jun 25, 2022 5:54 am
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by NETTIE »

Thank you Phil i don't know anyone with a lathe
I just thought someone may have one they've used once and don't intend to do it again
THOSE WHO NEVER DO ANYTHING WRONG NEVER DO ANYTHING
Sleeper
Minor Addict
Posts: 906
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by Sleeper »

NETTIE wrote: Sat Jul 30, 2022 9:24 am Hi guys looking for a valve guide drift please
Location?

John ;-)
NETTIE
Minor Friendly
Posts: 61
Joined: Sat Jun 25, 2022 5:54 am
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by NETTIE »

Sleeper wrote: Sun Jul 31, 2022 5:35 am
NETTIE wrote: Sat Jul 30, 2022 9:24 am Hi guys looking for a valve guide drift please
Location?

John ;-)
BUDE CORNWALL
THOSE WHO NEVER DO ANYTHING WRONG NEVER DO ANYTHING
philthehill
Minor Maniac
Posts: 9531
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by philthehill »

Nettie
I have sent you a PM regarding the valve guide drift.
Regards
Phil

NETTIE
Minor Friendly
Posts: 61
Joined: Sat Jun 25, 2022 5:54 am
MMOC Member: Yes

Re: BEG STEEL BORROW BUY DRIFT

Post by NETTIE »

philthehill wrote: Sun Jul 31, 2022 9:19 am Nettie
I have sent you a PM regarding the valve guide drift.
Regards
Phil
Phil you are on my Christmas card list now...
THOSE WHO NEVER DO ANYTHING WRONG NEVER DO ANYTHING
Post Reply