thread size for the oil pressure sensor.

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
User avatar
GLT819C
Minor Friendly
Posts: 14
Joined: Mon Dec 31, 2007 4:35 pm
Location: North Worcestershire
MMOC Member: Yes

thread size for the oil pressure sensor.

Post by GLT819C »

Hi, way back in the 1990's I fitted an electronic oil pressure gauge to my morris 1000, this replaced an mechanical oil gauge which I had fitted previously. I changed to a electronic version after the oil capillarity tube broke and coated the engine bay in oil.

The sensor has been refitted following an engine rebuild and is now leaking.

What is the thread size for it? so I can get a replacement.

As a stop gap I have ordered a standard oil pressure switch which should stop the oil leak.
Top
philthehill
Minor Maniac
Posts: 10797
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: thread size for the oil pressure sensor.

Post by philthehill »

The thread is 1/8" x 28 TPI BSP.

Top
Post Reply

Return to “Electrical”