Trunnion seals

You can use this area to advertise parts.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
philthehill
Minor Maniac
Posts: 9354
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Trunnion seals

Post by philthehill »

May be of interest:-
https://www.ebay.co.uk/itm/154882192165 ... SwUK5h~UYj

I have ordered a pair so it will be interesting to see how they fit.

myoldjalopy
Minor Legend
Posts: 1888
Joined: Tue Jan 29, 2013 10:32 pm
MMOC Member: Yes

Re: Trunnion seals

Post by myoldjalopy »

Yes, it will be interesting to see what you think, Phil. An excellent idea in theory and, if properly designed, should be a truly practical innovation.
philthehill
Minor Maniac
Posts: 9354
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: Trunnion seals

Post by philthehill »

The seals have arrived and look to be very good. The idea is very workable but as stated in the sales blurb the swivels need to be good condition and the grease not contaminated.
I will report back when fitted.

Sleeper
Minor Addict
Posts: 876
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: Yes

Re: Trunnion seals

Post by Sleeper »

Phil
Are they 3-D printed?
Any Idea of the longevity?

Looks like he's a member of the Dorset Branch..... are you on here?

John ;-)
philthehill
Minor Maniac
Posts: 9354
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: Trunnion seals

Post by philthehill »

They are 3D printed and have DMMOC in raised letters.
Longevity? - time will tell.

jagnut66
Minor Legend
Posts: 3472
Joined: Fri Apr 11, 2008 7:28 pm
MMOC Member: Yes

Re: Trunnion seals

Post by jagnut66 »

Very interesting, what are they made of Phil?
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1955 Series 2: Traveller: "Elsie May" -- On the road and enjoying her 'as is' for now but I see work ahead......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
Sleeper
Minor Addict
Posts: 876
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: Yes

Re: Trunnion seals

Post by Sleeper »

" It’s flexible TPU (thermoplastic polyurethane) says it’s resistant to oil Petrol grease etc. "

John ;-)
pertwoodpie
Minor Friendly
Posts: 48
Joined: Tue May 15, 2007 3:15 pm
MMOC Member: No

Re: Trunnion seals

Post by pertwoodpie »

yes they are made on a 3d printer in Dorset and by our wonderful club spares man called Brian! ( Dorset MMOC branch)
as you say time will tell on their longevity!
Sleeper
Minor Addict
Posts: 876
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: Yes

Re: Trunnion seals

Post by Sleeper »

Showing my ignorance here , he lists

Morris Minor Split Trunnion (Lower Trunnion) Dust Seal

and

Morris Minor Split Trunnion Dust Seal

and they are different , I thought they would be the same ?

John ;-)
philthehill
Minor Maniac
Posts: 9354
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: Trunnion seals

Post by philthehill »

There are two different seals:-
1. The seal between the swivel and trunnion.
https://www.ebay.co.uk/itm/154882192165 ... SwUK5h~UYj

2. The seal between the trunnion and the bottom trunnion thrust washer.
https://www.ebay.co.uk/itm/154889037790 ... Sw15hiJ3ca

myoldjalopy
Minor Legend
Posts: 1888
Joined: Tue Jan 29, 2013 10:32 pm
MMOC Member: Yes

Re: Trunnion seals

Post by myoldjalopy »

Yes, they just aren't described very well on EBay, although it is clear that the one seats between the trunnions and the swivel pin (top and bottom) and the other on either side of the lower trunnion, as described by Phil.
philthehill
Minor Maniac
Posts: 9354
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: Trunnion seals

Post by philthehill »

As regards the seal between the trunnion and the trunnion thrust washer. The Morris Marina factory fitted seal is a much better quality seal than that fitted to the Minor.
The main advantage of the seals listed in my post above is that they can be fitted without dismantling the suspension but if there is any sign of crud the suspension must be dismantled, cleaned, examined and if serviceable rebuilt with new grease and seals.

Sleeper
Minor Addict
Posts: 876
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: Yes

Re: Trunnion seals

Post by Sleeper »

Looks like extra photos have been added and make it clearer...

Thanks

John ;-)
User avatar
mobylette
Minor Fan
Posts: 229
Joined: Sat Feb 13, 2010 5:02 pm
MMOC Member: Yes

Re: Trunnion seals

Post by mobylette »

Just bought and fitted a pair of these, very good fit and finish.
Attachments
IMG_20220420_123553973.jpg
IMG_20220420_123553973.jpg (1.89 MiB) Viewed 155 times
Image
Post Reply