And... Breathe!

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
CaliTrav
Minor Friendly
Posts: 68
Joined: Tue Jul 09, 2019 5:15 pm
MMOC Member: Yes

And... Breathe!

Post by CaliTrav »

Just looking at fitting the pipercross mushroom air filter and want to make sure the breathing set up is correct.

I have the oil separator tappet chest cover, which is linked to the carb.
I also have a pipe from the rocker cover, which runs to the air filter housing.
The oil cap is a non-vented type.

Am I right in thinking that with the oil separator set up there's no need for the rocker cover take off as well?
Just thinking that the pipercross set up won't have a take off for this so wondering what to do with it.
philthehill
Minor Maniac
Posts: 10766
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: And... Breathe!

Post by philthehill »

The rocker cover breather pipe is not required when you have either the PCV fitted to the manifold or pipe to the carb from the oil separator canister.
Make sure that you have the correct rocker cover oil filler cap.
This is what you need to fit when you have the canister oil separator:-
https://www.morrisminorspares.com/engin ... 03-p830482

Post Reply