Just looking at fitting the pipercross mushroom air filter and want to make sure the breathing set up is correct.
I have the oil separator tappet chest cover, which is linked to the carb.
I also have a pipe from the rocker cover, which runs to the air filter housing.
The oil cap is a non-vented type.
Am I right in thinking that with the oil separator set up there's no need for the rocker cover take off as well?
Just thinking that the pipercross set up won't have a take off for this so wondering what to do with it.
And... Breathe!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Maniac
- Posts: 10802
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: And... Breathe!
The rocker cover breather pipe is not required when you have either the PCV fitted to the manifold or pipe to the carb from the oil separator canister.
Make sure that you have the correct rocker cover oil filler cap.
This is what you need to fit when you have the canister oil separator:-
https://www.morrisminorspares.com/engin ... 03-p830482
Make sure that you have the correct rocker cover oil filler cap.
This is what you need to fit when you have the canister oil separator:-
https://www.morrisminorspares.com/engin ... 03-p830482