Fitting an exterior sun visor.

Got any hints or tips? Share them here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Boomlander
Minor Legend
Posts: 1460
Joined: Sun Sep 25, 2011 6:32 pm
Location: Clacton On Sea, Essex, ENGLAND.
MMOC Member: Yes

Fitting an exterior sun visor.

Post by Boomlander »

Ideally you should have two people fitting.
1. Offer up the visor to the car and mark the fitting holes with masking tape and pencil.
2. Fit top clamps in position on guttering in line with the hole marks and tighten the clamp plate screws.
3. Offer up the visor and secure to the clamps with the bolts.
4. Brace between the front edge of the visor and the bonnet with a length of timber and cloths to avoid scratching the paint.
5. Slide the remaining two clamps up into position behind the visor and fasten as in 2 & 3.
6. Check visor is level looking at the front of the car and carefully tap clamps up or down as necessary.
7. Check and fully tighten all fixings.

Post Reply