Rocker assy.

You can use this area to advertise parts.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
philthehill
Minor Maniac
Posts: 9349
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Rocker assy.

Post by philthehill »

For sale - Rocker assy.
Having recently acquired a set of early forged rockers in excellent condition the built up rocker assy pictured below is up for sale.
The standard thickness shaft is brand new (took delivery from Minimine this morning) and has not been used.
The rockers are of the pressed steel type and have no wear to the tips or bushes. They were removed from a uprated thick wall rocker shaft which was in as new condition and is now being used with the forged rockers.
The adjusting screws have been changed to the non waisted type which are stronger.
The pedestals are of the forged steel type which can be machined to allow alignment of the rocker tips over the centre of the valve stem if required. Not required with a small bore 803cc/948cc/1098cc head.
This rocker assy is all ready to fit and go.

£45 plus postage which will be about £6.00.
Rocker gear 24.JPG
Rocker gear 24.JPG (1.59 MiB) Viewed 341 times
Rocker gear 25.JPG
Rocker gear 25.JPG (1.54 MiB) Viewed 341 times

NorthernMills
Newbie
Posts: 1
Joined: Tue Mar 08, 2022 8:57 am
MMOC Member: Yes

Re: Rocker assy.

Post by NorthernMills »

Hi, I would like to buy your rocker shaft. I am new to this forum so how do we go about this? Thank you.
philthehill
Minor Maniac
Posts: 9349
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: Rocker assy.

Post by philthehill »

The rocker assy is no longer available.

Post Reply