Metal sun visor query

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Pokey
Newbie
Posts: 2
Joined: Tue Sep 14, 2021 10:29 pm
MMOC Member: No

Metal sun visor query

Post by Pokey »

Hi all, I bought a metal sun visor a while ago made by weathershield. Was told it was for a morris minor, but don't think it is as its a couple of inches too long across the width of the car. Shortening it won't be a problem. But before I get into that could anyone tell me the measurement from front to back? The one I have is 10 1/2". Is that about right?
Thank you
Rolomorris
Newbie
Posts: 9
Joined: Wed Jul 31, 2019 12:14 pm
MMOC Member: Yes

Re: Metal sun visor query

Post by Rolomorris »

I have just measured sun visor and it is 10.5 inches.
Pokey
Newbie
Posts: 2
Joined: Tue Sep 14, 2021 10:29 pm
MMOC Member: No

Re: Metal sun visor query

Post by Pokey »

Thanks for your reply, that's what I was hoping to hear
User avatar
geoberni
Minor Legend
Posts: 3565
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Metal sun visor query

Post by geoberni »

Pokey wrote: Mon Nov 15, 2021 8:49 am Hi all, I bought a metal sun visor a while ago made by weathershield. Was told it was for a morris minor, but don't think it is as its a couple of inches too long across the width of the car. Shortening it won't be a problem. But before I get into that could anyone tell me the measurement from front to back? The one I have is 10 1/2". Is that about right?
Thank you
Just a thought, perhaps it was for a Morris Oxford.
It might be of more value to you if you sold it on and brought the correct one....
Basil the 1955 series II

Image
Post Reply