another id if possible
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 671
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
another id if possible
Could somebody advise what the name of this spacer is at the end of the rocker.There is a small curved pin holding it on
-
- Minor Maniac
- Posts: 10815
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: another id if possible
That is the retaining washer plain for the end rocker. The pin is called a split pin and is used to hold the retaining washer is place. There is a similar split pin at the other end of the rocker shaft. There should be a double coil washer (item No: 24 in the link below) between the retaining washer plain and the rocker.
See link for assembly details
https://www.moss-europe.co.uk/shop-by-m ... 51-71.html
See link for assembly details
https://www.moss-europe.co.uk/shop-by-m ... 51-71.html
-
- Minor Addict
- Posts: 671
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: another id if possible
Job done thank you