another id if possible

Questions about History or requests for information (does anyone know where my car is now?) can go here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Classiccars
Minor Addict
Posts: 660
Joined: Mon Dec 28, 2020 1:56 pm
Location: Pontypridd
MMOC Member: Yes

another id if possible

Post by Classiccars »

Could somebody advise what the name of this spacer is at the end of the rocker.There is a small curved pin holding it on
IMG_3992.JPG
IMG_3992.JPG (1.99 MiB) Viewed 1290 times
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: another id if possible

Post by philthehill »

That is the retaining washer plain for the end rocker. The pin is called a split pin and is used to hold the retaining washer is place. There is a similar split pin at the other end of the rocker shaft. There should be a double coil washer (item No: 24 in the link below) between the retaining washer plain and the rocker.

See link for assembly details

https://www.moss-europe.co.uk/shop-by-m ... 51-71.html

Classiccars
Minor Addict
Posts: 660
Joined: Mon Dec 28, 2020 1:56 pm
Location: Pontypridd
MMOC Member: Yes

Re: another id if possible

Post by Classiccars »

Job done thank you
Post Reply