Front damper mounting

Post by **reprs** » Thu Oct 22, 2009 8:29 pm

Can anyone advise? Refitting nearside damper to bulkhead of stripped cab. Offside has a plate with encapsulated nuts behind the crossmember which is welded in, nearside the plate is missing. What is the best way round this one? I can get behind the crossmember but it is tight so not sure if I could weld bolts in place. Hope this makes sense?

Post by **reprs** » Thu Oct 22, 2009 8:48 pm

Sorry, meant weld nuts in place!

Post by **bmcecosse** » Thu Oct 22, 2009 9:01 pm

There must be a plate in there - it's just broken free - you will need to find it! You may need to cut in to the boxmember from the wheel arch.

Post by **reprs** » Thu Oct 22, 2009 9:23 pm

Mmm, looks like it may have been drilled, see picture<br>

<br>