Sill and Cross Member repair

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
SR
Minor Addict
Posts: 641
Joined: Thu Aug 19, 2004 9:47 pm
Location: kent [south]
MMOC Member: No

Post by SR »

hiya lux, u can use standard rims for the roller, and 3 lengths of scaffold tube @ 1.9mtrs, do u have a builder type mate who can get these for u?, its takes time getting bits and welding it together, but u will save untold stress/time later, ill get it off 2 u on monday,steve :D
http://www.villagephotos.com/pubbrowse.asp?folder_id=1070767
Top
Lux_Moggy
Minor Friendly
Posts: 16
Joined: Thu Nov 24, 2005 10:15 am
MMOC Member: No

Post by Lux_Moggy »

Hello,
I now have the parts. So just starting to work out how they fit to the car. Which bits I will need to replace first so that I have something to weld the other parts to.

I will post some pictures at the weekend. probalby with some questions.

I getting very nevous about doing this work on the body.

Iain
Top
Post Reply

Return to “Bodywork”