59Elva wrote: ↑Wed Nov 18, 2026 2:47 pm
Thanks mobylette,
Very clever. It looks like the upper link slides on the center link and is held in the extended position by a pin. Does this arrangement stress the hinges or bonnet cross brace, both of which IMHO are somewhat fragile?
BB
It does tend to make the hinge gaskets slip sometimes at least it does on my car.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
With the bonnet near vertical the forces on the hinges and brace are almost fully downward. In the normal position there is much more twisting due to the off center position of support and more weight is on the brace compared to the extended position.