Ford engine?!

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
custommartin
Minor Fan
Posts: 103
Joined: Sat Jul 27, 2002 5:32 pm
Location: Brentwood, Essex
MMOC Member: No

Post by custommartin »

[/quote]
I was once told that there was a higher torque version of the type 9 - used on some of the Ford 2.8 engines. The same guy told me that these could be discerned by the longer input shaft.
I hope that's correct in case anyone is interested, but I'm not sure as it's nothing I've dealt with myself.[/quote]

Yep, the V6 Type 9 does have a longer input shaft.

200 bhp is the very limit for a Type 9.

The MT 75 is stronger and can take more horsepower which is why Ford used it on the 4x4 Cosworth.

BTW
The blue 'Stoke' :wink: 4x4 Cosworth Minor uses an mt 75 gearbox and this has well over 400 bhp!!!
1971 3.9 litre V8 Pick-Up - At least most of the bodywork is original!
Hibernating - Shhhhhhhhhhhhh!

1966 V8 powered roadster - Now out of hibernation - not long til it's done.................
Post Reply