rough running
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: rough running
so what is causing the engine no tto sprak on certain cylinders and it still start and run?
-
MarkyB
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: rough running
I detect a tiny hint of sarcasm from somewhere.
Try the other distributor, there is very little to go wrong with them unless they take a heavy impact.
Try the other distributor, there is very little to go wrong with them unless they take a heavy impact.
"Once you break something you will see how it was put together"
Re: rough running
Like an engine landing on it............ 
That obviously doesn't have the possibility of making the shaft run off centre to the points - thus not sparking on all 4 lobes.......... so it can't be that. 
Amazing how a discussion can go on for several posts - and then it slips out that the engine fell over on the dizzy....... but obviously that's not why it's now running poorly... I give up on this one.
That obviously doesn't have the possibility of making the shaft run off centre to the points - thus not sparking on all 4 lobes.......... so it can't be that. Amazing how a discussion can go on for several posts - and then it slips out that the engine fell over on the dizzy....... but obviously that's not why it's now running poorly... I give up on this one.
