Can anyone recognize these

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

Yes -when I ran Viva 12" wheels on my Autocross Mini (before anyone else used 12" wheels I may add!) - I made up special wheel nuts which fitted the 3/8" studs - and fitted into the gap - and also fitted the larger taper section on the Viva wheels!
To get back to the Q - if the studs are closer together - then they are v likely to be Marina/Triumph pitch - which is 3 3/4" PCD. The calipers I think will be Ford with that 'type 16' on them.
ImageImage
Image
Top
Mogwai
Minor Addict
Posts: 805
Joined: Sat Jan 05, 2008 9:43 pm
Location: Havant Hampshire
MMOC Member: No

Post by Mogwai »

was under the car today so here's a pic of the marina setup & mounting for comparison.
Also noticed the back of the stub axle on yours looks different, has it had that changed to accommodate the hubs?

<br>Image<br>
[sig]7538[/sig]
Top
flowersGTR
Minor Friendly
Posts: 62
Joined: Mon Nov 10, 2008 6:18 pm
Location: UK
MMOC Member: Yes

Post by flowersGTR »

well i can tell you they are not midget/sprite discs
sorry this is my only contribution
58HP at the wheels and 75 HP at the flywheel
Top
Post Reply

Return to “Mechanical”