Okay, I have a REALLY stupid question..

Post by **d_harris** » Thu Aug 06, 2009 11:16 pm

Didn't you have some last Friday?

Post by **limegreen** » Thu Aug 06, 2009 11:22 pm

Yeah, quiet time is when the step-mum goes to bed. Gah! Can't risk waking her up.

Post by **RogerRust** » Fri Aug 07, 2009 7:21 am

You might of thought it was a stupid question, but it was the answers that were really stupid!

Post by **David53** » Fri Aug 07, 2009 11:41 am

Might be a stupid question but I have to say that is the coolest signature pic I've seen...........

Post by **Kevin** » Fri Aug 07, 2009 12:24 pm

Ondergard wrote:Not ANOTHER victim of the old "Wallaby Rod" scam?

All other types, including the Rose Taupe Traveller soft-top, still retained the export-only Wombat Pole, tapped to 8 1/2" AF.

If you look closely, you'll see it attached to the top of the bell housing, right next to the pressure switch for the Kangaroo valve.

Tch, tch... I'd have expected you lot to know that.

8 1/2" AF that size tap must have been hard to find unless of course the pole is self tapping

Post by **alainmoran** » Fri Aug 07, 2009 1:02 pm

What use would a wallaby rod be if it werent self-tapping ... you'd have to use a tap on the wallaby first otherwise, and it's bad enough getting the chuffers onto the wallaby rod without having to hold them down and run a tap through them first

Post by **jonathon** » Fri Aug 07, 2009 1:25 pm

R.O. Dent supplies do a wallaby retaining bracket which is ideal when trying to tap them. Its adaptable for larger animals too !!

Post by **ASL642** » Fri Aug 07, 2009 3:03 pm

Do you happen to know if they stock the safety belt extenions my 6month old Rhinoceros wants to sit in the front beside me and none of the available belts fit?

Post by **jonathon** » Fri Aug 07, 2009 3:58 pm

Have a look at Recaro's new Rhino extender seat, its ideal for small cattle, or indeed the rhino, hence its name. You will need the F. B. Stard
4 point harness, but I believe these are free with every purchase at the moment.

Post by **ASL642** » Fri Aug 07, 2009 4:11 pm

Are the re-enforcing plates for the moggy floor still made as I might need them as well?

Post by **jonathon** » Fri Aug 07, 2009 4:20 pm

Yes, but due to the T and C's I'm not able to say that we sell them

Post by **moggydriver62** » Fri Aug 07, 2009 4:38 pm

Wallaby's & hippo's.? I was told by a pommy that in oz
it's sheep.
Now all together sing there will never be another uwe.

Post by dp » Sat Aug 08, 2009 8:09 pm

There was a thread about making your own hazard circuit quite cheaply if that's what you want.

http://www.morrisminoroc.co.uk/index.ph ... pic&t=8986