SADMOG (Sowf'ampton taawn)

Post by **Jay-Minor** » Wed Apr 30, 2008 6:48 pm

here you go carlo

Post by **WPR678B** » Wed Apr 30, 2008 7:16 pm

That is sweet mate!

Really must get my van done

Post by **Rob_Jennings** » Thu May 01, 2008 4:20 pm

as always late decision it seems

how about the new forest hotel at Ashurst?

No idea what the weather is going to be like, but will be in the astra as Colin may join me and needs a comfortable ride ;-)

Post by **Peetee** » Thu May 01, 2008 5:11 pm

Ashurst is fine for me

Post by **d_harris** » Thu May 01, 2008 6:53 pm

Its a lovely evening so I was going to suggest the oak.

But guess I'm too late.

Me and Matt will be sticking our noses in.

Post by **paulk** » Sun May 04, 2008 9:09 am

Is anyone available at some point this weekend to try and roll Milly?
I've welded all I can do upright and I just want to get her on her side to get at the sill flange.

Post by **paulk** » Sun May 04, 2008 9:25 pm

Job done

Took three of us and was not as tricky as I thought it would be.
Admittedly no engine or doors so its about as light as possible.

Post by **Mike Shipman** » Tue May 06, 2008 9:03 pm

Oh dear - my wife has a pre school playgroup meeting this Thurdsday evening (she's the treasurer) so Im afraid I cant make it again

Have a good evening.
Regards, Mike.

Post by **d_harris** » Tue May 06, 2008 9:10 pm

Im not going to be there either this week. Job interview on Friday morning in Brighton.....

Post by **Matt** » Tue May 06, 2008 9:51 pm

I may or may not make it this week, it depends on the progress I have made on the convertable

Post by **Rob_Jennings** » Wed May 07, 2008 9:43 am

ok folks lets say Empress as its easy for most to get to and see who can make it.

need to ask for some help guys... brake fluid leak has stepped up a level, not had transmission cover off so can't tell if it is hose to the top up kit where it enters the master or if the master is giving up, but need to change it ASAP (like now before I drive to france!) Is there anyone that can lend a hand on sunday? payment in beers of your choice (take away of course) tea and biscuits during the job. Have new master cylinder ready to go (need to remove seal first due to discs) spare screws for those that get mangled in cover removal, but need to borrow brake bleed kit and anyone got one of those tools to hold the torsion bar out of the way? otherwise it gets to be a bigger job.

Cheers guys see you Thursday

Post by **WPR678B** » Wed May 07, 2008 5:27 pm

Won't be there this week either, but next week is looking good at the mo!

Post by **Matt** » Wed May 07, 2008 9:23 pm

I have an easybleed with a minor cap grafted on but its not here...

Im going to the friends this weekend where it is so I will pick it up, but if there are 2 people its not that difficult to bleed the system anyhow

Post by **paulk** » Wed May 07, 2008 9:44 pm

I have a little brake bleed widget I'll grab it from work tommorrow.

See you at the Empress

one of those tools to hold the torsion bar out of the way?

A crow Bar?

See you at the Empress

Post by **tufty** » Thu May 08, 2008 12:07 pm

Crow bar?

Back in the seventys we used to cut them out with a grinder chassis section and all and gas weld the whole chunk back in hardly needed a spanner. I will meet up with you guys soon promise!

Post by **paulk** » Thu May 08, 2008 1:05 pm

Arrgh cant find the little brake bleeding widget

I'll see if its at home but I may not find it, its so small.

Post by **Peetee** » Thu May 08, 2008 2:01 pm

Paul. We bought the bleed kit remember? - I'll bring it this eve.

Post by **paulk** » Thu May 08, 2008 7:04 pm

Oh I forgot about that one. I'll still try and find the little one.

Post by **paulk** » Sat May 10, 2008 9:23 am

Ok I know it's far too early to decide on next weeks venue, But.

I could do with a couple/three (pairs of) hands to roll Millly back on her wheels , Laughing at my Garden and as much Tea as fits in your pockets is included in this once in a lifetime offer

.

As I'm on the scrounge has anyone got a Radiator that still has some gills on it? Maudes is usable and solid but the thin gills are falling out at an alarming rate.

Also Matt, any chance of an 1100 gasket set? not fussed which make as its all the little ones I'm after not the head so much.

Any hoo where to next week then

Post by **Matt** » Sat May 10, 2008 5:02 pm

Will get you a head set this week paul

You want a sadmog evening at Chez PaulK? Fine by me