Resetting quarter light glass.

[BobM]

I need to reset the quarter light glass in my Traveller.
Could someone please recommend a source for the rubber.
I have only found 3mm thick in my search, which is clearly too thick.

BobM

[taupe]

You can buy quantities and various thicknesses of Nitrile Rubber Sheet on ebay etc

Neoprene sheet would probably also be ok

Taupe

[svenedin]

https://www.morrisminorspares.com/body- ... -h-p828248

Stephen

[taupe]

Stephen

I think he's refering to the Quarterlight glass rubber which holds the glass in the chrome frame.

But yes if its a quarterlight rubber that he needs...then ESM are good as are Baines and Andrew E, Ebay etc

Taupe

[geoberni]

Assuming you're speaking of the glazing strip for the glass in the quarter light, have you tried the offering of the MGOC intended for MG models, AH Sprite etc?
https://www.ebay.co.uk/itm/255088005296

You could always contact them and ask what thickness it is....

[BobM]

Thanks . Yes it is the glazing strip for the glass to the stainless frame.
The MGOC offering looks promising. I shall order some and see how it goes.

Thanks BobM

[silloyd]

Just done exactly this job using 5 × 9 × 11mm flat Rubber Edging Trim.

https://www.ebay.co.uk/itm/820245120671 ... 7054000583

It's snug but there again, you don't want it coming out easily.