Citric acid results

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
les
Minor Maniac
Posts: 9775
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Citric acid results

Post by les »

Thanks Phil and all for interest. I can now move on.

User avatar
svenedin
Minor Maniac
Posts: 5022
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Citric acid results

Post by svenedin »

Excellent result!

Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
Meggie moggy
Minor Fan
Posts: 129
Joined: Sun Apr 18, 2021 6:16 pm
Location: West Sussex
MMOC Member: Yes

Re: Citric acid results

Post by Meggie moggy »

Wow that looks brilliant i shall be doing this next weekend :tu1:
Meggie living in West Sussex. Slowly being restored.
User avatar
svenedin
Minor Maniac
Posts: 5022
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Citric acid results

Post by svenedin »

Meggie moggy wrote: ↑Sun Oct 18, 2026 8:52 pm Wow that looks brilliant i shall be doing this next weekend :tu1:
Be aware that the citric acid treatment leaves bare iron. This will flash rust very quickly unless painted (obviously not inside an engine) or protected in some way e.g sprayed with light oil.

Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
59Elva
Minor Fan
Posts: 246
Joined: Fri May 15, 2026 2:59 pm
Location: USA, upstate ny
MMOC Member: No

Re: Citric acid results

Post by 59Elva »

I drained the radiator Sunday night before the temperature dropped below freezing. I filled the system today with the acid solution. It took about four US quarts. Unrelated I had a devil of a time starting the engine to circulate the acid. The battery was low having sat for a couple weeks. I put the charger on while we went grocery shopping. Still not starting after charging. I removed the plugs to find them a little sooty but plug #3 was oil fouled.
With all the other things needing attention I never got around to a compression test. Until then I’m going to worry if I have a bad piston or valve in that cylinder.☹️
After fiddling with the choke and idle screw I did get it running and warmed up. I’ll repeat starting it daily for the rest of the week and then flush a couple times and refill with Zerex Original Green.
Is the consensus that baking or washing soda neutralization is not required?
Bill B. ‘59 Pickup USA
Post Reply