Series 2 Items to be restored - Battery Tray

[taupe]

The latest item being restored on my late 53 Series 2 is the battery tray.

The old one was somewhat past its best but enough of the original remained for accurate measurements.

Series 2 battery tray.jpg (1.45 MiB) Viewed 369 times

I started by making the two hardwood strips

20261016_122048.jpg (731.25 KiB) Viewed 369 times

Then added the ply and stained it all with spirit black

20261018_165400.jpg (29.66 KiB) Viewed 369 times

20261018_165432.jpg (28.17 KiB) Viewed 369 times

20261018_165445.jpg (50.64 KiB) Viewed 369 times

20261018_165455.jpg (37.99 KiB) Viewed 369 times

20261018_165525.jpg (24.13 KiB) Viewed 369 times

The ply is screwed to the hardwood strips with CSK screws.

I'm pleased with how it turned out and will probably make a few spares with the leftover materials.

Taupe

[firedrake1942]

Looks excellent - If that is the same as the MM lowlight one, I would be interested, alternatively the dimensions would be useful.

[taupe]

Thanks Firedrake

The part number for my version would be AAA3678 -Tray Wood... it finished around Car No.s 419584 - 430034 depending on model.

You could check the MM series parts list if you have one?

On mine the side bars are just over 3/4" wide x 1/2" and 6 1/2" long (They may have varied during production). You can measure the hole centres in your metal battery housing for the other dimensions but my holes are 10 7/8" x 5" CRS and the ply is just short of the large grommet at the rear

Taupe

[firedrake1942]

Many thanks, that is hugely useful.