Hi
I recently bought this item https://www.morrisminorspares.com/elect ... al-p829879
Is there a loom extension that goes with that plug please? Or is there something else I can use please?
Thanks
Rich
Flash Facility Indicator Switch Assembly RHD (Not Original)
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
- Bill_qaz
- Minor Legend
- Posts: 2277
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Flash Facility Indicator Switch Assembly RHD (Not Original)
Have you asked ESM if there's a harness or do you cut off the plug and make your own connections.
Regards Bill
- geoberni
- Minor Maniac
- Posts: 5246
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Flash Facility Indicator Switch Assembly RHD (Not Original)
As I understand it, this replacement item also included the Dip Switch and a headlamp flasher, so it will need an additional connections to do that.
It's not a job for anyone who is unfamiliar or lacks confidence with their vehicles wiring.
I would go back to ESM about it.
A bit 'off' if they are selling this without suitable support, either advance notice to purchasers of what is required, or selling the actual parts necessary.
It's not a job for anyone who is unfamiliar or lacks confidence with their vehicles wiring.
I would go back to ESM about it.
A bit 'off' if they are selling this without suitable support, either advance notice to purchasers of what is required, or selling the actual parts necessary.
Basil the 1955 series II


Re: Flash Facility Indicator Switch Assembly RHD (Not Original)
All the info for fitting is here: https://www.dorsetmmoc.co.uk/wordpress/ ... ionsab.pdf

