Crankshaft pully spanner size...

Post by **HarryMango** » Thu Aug 11, 2005 10:27 pm

Cam wrote: Yes, that could certainly be done but I don't have a spare (or any) 3/4 W box spanner!

Do you have one spare that I could purchase

"Dont Panic Dont Panic" - I think I just might be able to sort you out -I'll have another delve tomorrow & let you know.

Rog
aka "Big Rog's Tool Emporium" (awaiting comments from the gutter)

Post by **Cam** » Thu Aug 11, 2005 10:30 pm

Cheers Rog, you're a good 'un

Rog
aka "Big Rog's Tool Emporium" (awaiting comments from the gutter)

I would not dare, I'd have to moderate myself!

Post by **bigginger** » Thu Aug 11, 2005 10:47 pm

Well, this spanner fits it...

http://easyweb.easynet.co.uk/industry.e ... _tools.htm
Pic courtesy of Guy, BTW
a

Post by **HarryMango** » Thu Aug 11, 2005 11:01 pm

That looks to me like a Mongolian Society of Engineers 7/43" cubit spanner on the end of an arm 3/16" in diameter, 7 feet long with 3 sets of universal joints in it.

(with due reverence to F E Hobbs)

Rog

Post by **bigginger** » Fri Aug 12, 2005 12:24 am

It is - and well spotted, that man. I meant the adjustable though - available from your nearest tractor spares shop, and bought specifically to stop the engine turning when working on the clutch with the engine out of the car.

Post by **paulk** » Fri Aug 12, 2005 8:29 am

I'd imagine if you got a couple of blokes to help you could turn the whole damn car over with that!

Hey could save a fortune in roll cages

Paulk

Post by **bigginger** » Fri Aug 12, 2005 12:51 pm

:D If only...
a

Post by **rayofleamington** » Fri Aug 12, 2005 4:55 pm

I'd imagine if you got a couple of blokes to help you could turn the whole damn car over with that!

With a couple of blokes - you can manage without the spanner...

Post by **bigginger** » Fri Aug 12, 2005 5:31 pm

Cheat!

a

Post by **HarryMango** » Sat Aug 13, 2005 11:00 am

Cam wrote: but I don't have a spare (or any) 3/4 W box spanner!

Do you have one spare that I could purchase or maybe a hunt on eBay...

Hi Cam

I have found a spare 3/4W Box spanner which I could let you have for £5.00 total inc postage.

Rog

Post by **Cam** » Sun Aug 14, 2005 10:58 am

Thanks Rog, I have sent you a PM.

Post by **HarryMango** » Sun Aug 14, 2005 11:45 am

I have sent you one back Cam

Rog

Post by **Kevin** » Mon Aug 15, 2005 5:03 pm

Cam
3/4" Whitworth sockets are still available from my local tool supplier to order in a couple of days and they have 2 choices
1/2" drive 26mm deep and 3/4"drive 29mm deep (I love the mix in sizes) these are both made by Britool and cost
£14:65 and £21:80 each, hope this helps.

Post by **HarryMango** » Tue Aug 16, 2005 9:07 pm

Hi Kevin

Cam wanted it for the starting handle dog & for this it needs to be about 50mm deep.

Rog

Post by **Cam** » Tue Aug 16, 2005 11:18 pm

Thanks for the info Kevin, but Roger has it covered!