Is it possible to remove the clutch / brake pedal assembly without removing the gearbox ?
My brake pedal has some side to side play and I have been looking at removing it for re bushing.
It looks like it might be a bit of a squeeze to get the shaft out?
Thanks.
Clutch / brake pedal removal ?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Clutch / brake pedal removal ?
I’m not 100% but you might be able to remove the shaft towards the gearbox far enough to enable the brake pedal to be taken out, however the shaft, which is part of the clutch pedal, is usually the part that wears more than the brake pedal bush.
-
- Minor Friendly
- Posts: 11
- Joined: Tue Sep 27, 2022 12:25 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: Clutch / brake pedal removal ?
Thanks for the reply.
I suspect that the shaft itself might be worn so it looks like it might have to wait for the winter to remove the gearbox to allow enough room to draw the shaft fully out.
Thanks again.
Joe.
I suspect that the shaft itself might be worn so it looks like it might have to wait for the winter to remove the gearbox to allow enough room to draw the shaft fully out.
Thanks again.
Joe.