Vanessa '68 2dr saloon

[GavinL]

More progress being made now that I'm back working on Vanessa having put other projects aside. Nearside completed and a start made on the offside. The inner wing needed a lot of work to get it to fit. I spent a lot of time fitting the wing to get the front edge aligned and the new flange and wing fixings correct.

20250124_092206.jpg (1 MiB) Viewed 24524 times

20250124_092337.jpg (789.18 KiB) Viewed 24524 times

[svenedin]

Good stuff! It's not easy working in garages in winter. The cold is most unpleasant!

Over on the Facebook group a chap had his garage burn down losing his Morris and months of restoration work. Do be extra careful with welding and potentially inflammable stuff nearby.

Stephen

[GavinL]

Good session today drilling out the spot welds, removing the inner wing and cleaning up the flanges. Upper rear chassis leg is sound, lower section which houses the rear spring hanger is heavily corroded and is a mass of patches.

20250126_144013.jpg (1.24 MiB) Viewed 24429 times

20250126_142048.jpg (1.69 MiB) Viewed 24429 times

[GavinL]

I'm starting to work less so will have time to make more progress so expect more regular updates.
Today prepared and welded the lower repair panel in the o/s rear wing.
View from inside the car

20251208_155748.jpg (2.02 MiB) Viewed 2808 times

Panel held with Cleco clamps

20251208_161034.jpg (1.73 MiB) Viewed 2808 times

Dressed and sprayed with weld through primer. Join will be skimmed with filler once rear wing flange is welded in .

20251208_163559.jpg (1.7 MiB) Viewed 2808 times

[GavinL]

Good run today- tacked in the right rear wing flange and welded in the repair flange.

20251214_152258.jpg (1 MiB) Viewed 2219 times

Lots of clamping to keep it tight. Wing bolted on to ensure flange location is correct.

20251214_154221.jpg (973.71 KiB) Viewed 2219 times

repair flange tacked in place.

20251214_155426.jpg (1.95 MiB) Viewed 2219 times

flange welding completed.

20251214_172324.jpg (968.24 KiB) Viewed 2219 times

next stage is to install the inner wing. From my experience on the other side this will require extensive adjustment.

[Paladin1962]

I'm instantly reminded just how fortunate I am that my 57 is so solid after 68 years