I’m fitting a new DB10 relay on a restored car, but I’m not sure if my car has the right mounting holes already in the inner
wing.
Can someone please post a picture showing the DB10 in its original factory position please?
Surprisingly I can’t find a pic in either my Original Morris Minor book or anywhere on the web.
Thanks!
Andy
DB10 Relay mounting position
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 13
- Joined: Tue Mar 17, 2009 5:27 pm
- Location: Box, Wiltshire
- MMOC Member: Yes
DB10 Relay mounting position
Owner of “Bluebell”, the historic racing Morris Minor.
Re: DB10 Relay mounting position
See below...
- Attachments
-
- Screenshot 2024-11-27 095927.jpg (72.77 KiB) Viewed 339 times
-
- Minor Friendly
- Posts: 13
- Joined: Tue Mar 17, 2009 5:27 pm
- Location: Box, Wiltshire
- MMOC Member: Yes
Re: DB10 Relay mounting position
Perfect, thank you.
Andy
Andy
Owner of “Bluebell”, the historic racing Morris Minor.
- geoberni
- Minor Legend
- Posts: 4040
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: DB10 Relay mounting position
I agree with MM1949's photo, although I have seen the Flasher Unit on the rearmost side of the DB10 rather than in front of it.
My SII was fitted with the DB10 system to replace it's trafficators; they didn't get it in the right place, though I think it is more logical where they did place it.
(Old photo from when I brought him; I have made some changes, like the Coil is now back where it should be on the bulkhead and he has a high-top radiator)
My SII was fitted with the DB10 system to replace it's trafficators; they didn't get it in the right place, though I think it is more logical where they did place it.
(Old photo from when I brought him; I have made some changes, like the Coil is now back where it should be on the bulkhead and he has a high-top radiator)
Basil the 1955 series II