Help with lights

[Maria1959morris]

Hi sorry yes the rubbers round lamp were supplied with lights thanks

[Maria1959morris]

Tried everything today checked all earth's cleaned all earth cleaned indicator relay points still same all lights working apart from right hand indicator when turning on the indicator that ain't working the headlamp above it indicates

[Maria1959morris]

Took.tje flasher relay.off.cleaned.it notice.only has 2 wires on been looking at.others online most cars.have 3 is that.correct. wonder why I only have 2

[geoberni]

Took.tje flasher relay.off.cleaned.it notice.only has 2 wires on been looking at.others online most cars.have 3 is that.correct. wonder why I only have 2

It all depends on how your Indicators have been added to the car, bearing in mind that the car originally had Trafficators.
Trafficators don't flash (although flashing LEDs are now available), they simple come out as a lit arm or semaphore.

A 2 pin flasher simply interrupts the supply to the Indicators, so a warning or tell tale lamp for them has to be after the Flasher, bringing with it the problem of how to connect it to work for both L and R selection. Often such 2 pin Flashers are used in cars where there are 2 warning lamps built into either side of the dash, some Triumph and MG cars come to mind for having this.

The 3 pin Flasher has a separate output connection to a warning lamp, so it will flash the warning lamp irrespective of L or R being selected.

So you need to look at how your warning lamp is connected up. I don't know if your 1959 car originally had a steady or flashing warning lamp.
Perhaps someone here with a Series 3 car can help with that?

[Maria1959morris]

Thanks I have 3 working indicators all.side.lights brake light etc.just 1 indicator

[geoberni]

Thanks I have 3 working indicators all.side.lights brake light etc.just 1 indicator

Sorry, but what's that got to do with having a 2 terminal Flasher Unit, which is the point I was explaining....

[Maria1959morris]

Sorry for.the late.replies so Just to kinda try sort out this wiring light problem so all indicators work apart.from.the left hand side so I have ran a wire from the back indicator to the front left which wasn't working and now it's working but problem being all.indicators work all.side.lights work but when pull the pull button for the headlamps headlamps come on but indicators stop working when push button in to just.side lights the indicators work all though left clicking slower than the right I.. confused thought I had it sorted where all side lighys indicators are working when pull button out further for headlights the indicators stop also the headlamps were indicating and the flasher relay bit hot is it supposed to be at the end of my tether with this lights

[Maria1959morris]

Also when right indicator on it flashes but silent when turn left indicator on it clicks on of sound

[Maria1959morris]

Just seen now when putting left hand indicator on both headlamps flash but when right one put on normal when pulling out switch for headlamps the light on end of stalk comes on when on full beam clicking switch on floor left hand headlight out when clicking switch back of full beam comes on

[Maria1959morris]

Sussed sorted fixed earth thanks

[Maria1959morris]

Well.was sorted now relay isn't clicking and have no indicators will it ever just work lol