Air filter mount
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Air filter mount
I am looking for the plate that sits on the carb which the air filter housing sits upon. The manual calls it a casting. Can anyone help please? It’s part 4 in the picture. Thanks in advance.
- Attachments
-
- IMG_2846.jpeg (2.96 MiB) Viewed 2705 times
-
- Minor Maniac
- Posts: 11182
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Air filter mount
Here you are:-
https://www.ebay.co.uk/itm/156159765774 ... R5S6rf2PZA
and here are the bolts required to hold the plate in place:-
https://www.ebay.co.uk/itm/156158224018 ... SwHxpmFAr2
https://www.ebay.co.uk/itm/156159765774 ... R5S6rf2PZA
and here are the bolts required to hold the plate in place:-
https://www.ebay.co.uk/itm/156158224018 ... SwHxpmFAr2
-
- Minor Friendly
- Posts: 86
- Joined: Wed Sep 20, 2023 12:42 pm
- Location: Somerset UK
- MMOC Member: No
Re: Air filter mount
Hi Phil, don’t know what this is but it looks similar to part in diagram!
Regards Michelle
Regards Michelle
- Attachments
-
- image.jpg (2.71 MiB) Viewed 2285 times
-
- image.jpg (2.61 MiB) Viewed 2285 times
Re: Air filter mount
It's got a broken stud, so it will not accept the retaining piece (like a tube with a wing nut on the end) until it has been repaired - possible, but not easy. I would buy the one for which Phil supplied the link.