Is an oil pump from a USHM3 engine suitable for fitting in a USHM2 engine? The oil pump I have is from the USHM3 engine (which used to be in my car) and apart from the shape of the hood I cannot discern any difference between them (based on the diagrams in the workshop manual). The oil pump I have got has a gauze inside.
Attached are photos of my oil pump and the one shown as correct for a USHM2 in the manual (red arrow illustrates the only difference I can see).
Advice would be much appreciated!
Many thanks,
Ryan
Series MM side valve oil pumps
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 231
- Joined: Thu Feb 05, 2009 2:59 pm
- Location: West Sussex
- MMOC Member: Yes
Series MM side valve oil pumps
- Attachments
-
- IMG_7500.JPEG (440.94 KiB) Viewed 1027 times
-
- IMG_7499.JPEG (260.86 KiB) Viewed 1027 times
-
- IMG_7498.JPEG (392.92 KiB) Viewed 1027 times
-
- IMG_7497.JPEG (338.54 KiB) Viewed 1027 times
-
- E857C565-5A1B-4C5D-804A-BC5529A9C3CD.JPEG (647.84 KiB) Viewed 1027 times
Ryan Watson
-
- Minor Fan
- Posts: 222
- Joined: Sat Sep 12, 2020 9:20 pm
- MMOC Member: No
Re: Series MM side valve oil pumps
It’s okay if the USHM2 block has been modified to have an external filter, otherwise fitting an USHM3 pump to an USHM2 engine will leave the engine with no oil filtration!
What you have looks like an USHM2 pump (or military generator/ marine engine). The USHM3 has quite a different body and pickup. See photo.
What you have looks like an USHM2 pump (or military generator/ marine engine). The USHM3 has quite a different body and pickup. See photo.
Last edited by Mick Lynch on Thu Dec 28, 2023 8:24 pm, edited 1 time in total.
-
- Minor Fan
- Posts: 231
- Joined: Thu Feb 05, 2009 2:59 pm
- Location: West Sussex
- MMOC Member: Yes
Re: Series MM side valve oil pumps
Oh yes - I see what you mean - having referred back to the diagram I can see the difference now!
Interestingly, the engine this pump came from was a USHM3 with external oil filter - so it would have had the filter and the gauze inside the pump for filtration. It’s strange that it doesn’t seem to have that ‘lip’ in the body which you can see in the workshop manual diagram.
Many thanks.
Interestingly, the engine this pump came from was a USHM3 with external oil filter - so it would have had the filter and the gauze inside the pump for filtration. It’s strange that it doesn’t seem to have that ‘lip’ in the body which you can see in the workshop manual diagram.
Many thanks.
Ryan Watson