seats

[John Nash]

I have a, new to me , 1953.

Interior is poor and it has later front seats, which are pretty buggered. I had two original seats with it and a pile of covers, door cards etc in a pretty electric blue which were from a different source ( later car)

I need other parts for the seat re-cover, such as webbing and prob new foam. Watched some videos and it all seems doable.

My question is whether the front seats i have are series 11 - the car is but I am not sure the seats are. Its a bit confusing about which seat parts fit which seats.
Not too fussed on originality.

Here is what I have

[myoldjalopy]

Those seats look like from an early 1000, the SII ones were more curved, especially the back-rests. But yours won't look very out of place in a SII. Some of the SII seats were also used in the early 1000's, I guess to use them up.

[John Nash]

Thanks.

Likely the new covers i have will fit and I now know which extra bits I need.

The seats in there now look fiesta or mini metro and are in an awful state.

[King Kenny]

Hi John. I have just replaced my seat covers after many tears of putting it off. It is not too difficult job and the results are well worth the effort. I would suggest that you fit the rubber diaphragm seat bottoms rather than the straps.

IMG_0766 Large.jpeg (200.06 KiB) Viewed 10267 times

[ManyMinors]

Don't forget that 1953 seats and 1969 seats are completely different.
They bear no resemblance to each other in terms of appearance OR construction

[myoldjalopy]

It may be helpful for John to check out the Newton Commercial seat covers etc. As I mentioned before, I believe his green seats to be from 1956 -1959
Check these: https://newtoncomm.co.uk/collections/mo ... 000+_seats