I'd like to replace the four (severely degraded) rubber spacers/dampers where the wiper unit sits on the mount plate.
Would anyone know what size the bolt heads are, on the underside of that plate? I tried 1/4" as on the wiper unit cover, but no luck.
Thanks.
Tom M.
'57 Traveller wiper unit
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: '57 Traveller wiper unit
If I understand the fixings you require, I think you’ll find the threads are 2ba nuts
Re: '57 Traveller wiper unit
After much fumbling, I found the nuts on the bolts (the bottom under the mount) are 11/32".
I wonder what causes those rubber dampers to deteriorate so badly. They look "melted".
One of mine was actually like shiny black tar, soft and sticky. Blech.
I wonder what causes those rubber dampers to deteriorate so badly. They look "melted".
One of mine was actually like shiny black tar, soft and sticky. Blech.
-
- Minor Maniac
- Posts: 10879
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
-
- Minor Legend
- Posts: 2558
- Joined: Tue Jan 29, 2013 10:32 pm
- Location: Kernow
- MMOC Member: Yes
Re: '57 Traveller wiper unit
The rubber has 'perished' - like we all will one day
If you are interested in why rubber deteriorates, looky here: https://www.martins-rubber.co.uk/blog/w ... teriorate/
If you are interested in why rubber deteriorates, looky here: https://www.martins-rubber.co.uk/blog/w ... teriorate/