Hello, I'm just in the process of finishing the rear wiring on my 1970 Traveller.
I have 2 P clips to go back on, but no reference as to were to put them, or whether I have got this wiring right as it looks a bit untidy. Can anyone advise please?
Rear Wiring Loom Routing on a Traveller
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Rear Wiring Loom Routing on a Traveller
If they are the large metal ones with rubber inserts, then they attach to the bumper mounting iron.
Re: Rear Wiring Loom Routing on a Traveller
Thanks is it the bolt that goes vertically through the floor pan, or one of the two that fit horizontally to the metal bracket
Re: Rear Wiring Loom Routing on a Traveller
The top horizontal one is normal, but in truth, any would do unless you're looking for concours.
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
Re: Rear Wiring Loom Routing on a Traveller
Yes, be sure the P clips are either rubber covered or bell-mouthed metal. You will find the wiring to the near side lights tucks neatly in the recess immediately behind the lower panel.