More questions related to this poorly maintained Morris I've purchased!
Whilst trying to find why the car is puffing out black smoke from the exhaust I found that the throttle linkage is very worn to the point of failure.
I've attached a link below, anyone know what parts I should get here? Normally good with an exploded diagram but struggling her for some reason
https://youtu.be/BMD3rKIac4s
Throttle linkeage
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
philthehill
- Minor Maniac
- Posts: 11580
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Throttle linkeage
The part shown in the you tube video is this:-
https://www.morrisminorspares.com/fuel- ... 89-p830687 (NCA)
https://www.moss-europe.co.uk/catalogse ... &q=ACA5289
It is never a tight fit in the carb butterfly operating lever. So long as the cable is not worn and you can get a fully open throttle you will be ok.
You can tighten the fit in the arm by placing a suitable washer(s) between the split pin and lever.
https://www.morrisminorspares.com/fuel- ... 89-p830687 (NCA)
https://www.moss-europe.co.uk/catalogse ... &q=ACA5289
It is never a tight fit in the carb butterfly operating lever. So long as the cable is not worn and you can get a fully open throttle you will be ok.
You can tighten the fit in the arm by placing a suitable washer(s) between the split pin and lever.