Boot floor screws or bolt size.

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Boot floor screws or bolt size.

Post by greendefender123 »

Hello Could someone please advise the size of the bolts or screws that hold the rear floor in. They were gone before I got it.

Thanks alot Steve
20170719_142146.jpg
20170719_142146.jpg (370.26 KiB) Viewed 1472 times
IslipMinor
Minor Legend
Posts: 2147
Joined: Mon May 10, 2004 9:10 pm
Location: Oxford, UK
MMOC Member: Yes

Re: Boot floor screws or bolt size.

Post by IslipMinor »

There are 2 x self-tapping screws and 10 x 2BA screws x 5/8" long, with a Phillips drive countersink head - see the photo below (on a saloon):
IMG_2211.JPG
IMG_2211.JPG (2.42 MiB) Viewed 1425 times
Also fit a spring washer between the nut and the support frame.
Richard


greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Boot floor screws or bolt size.

Post by greendefender123 »

Proper job thanks.
Post Reply