Hi people, just fitted the electrical temp gauge to the moggy from a mini as per the instructions on this forum I found and it seems like the gauge is fluctuating up and down when running?
I connected to the fuel tank gauge wire as it says to do but the needle was all over the place with the engine running?
Any thoughts please before I go bonkers
Regards
John
Temp gauge fluctuating
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Temp gauge fluctuating
You need to wire it into the voltage regulator at the
back of the fuel gauge to get at stable live feed to it .
back of the fuel gauge to get at stable live feed to it .
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.
Re: Temp gauge fluctuating
Hi folks, when wired to voltage regulation device the gauge fluctuations with the 10 volt regulated power, I wired it to the other side and it works fine now.
The fluctuating was driving me bonkers off the fuel gauge terminal
John
The fluctuating was driving me bonkers off the fuel gauge terminal
John