Timing Cover Bolts

[Monty-4]

Hi folks,

After some research I think I've found that the "small" timing cover bolts are 1/4" UNF, but what are the larger ones? I discovered that some of the threads were less than perfect when replacing the timing cover with the mini one that allows room for the tensioner arm.

Thanks!

[philthehill]

You are correct in that the small ones are 1/4" UNF - the larger ones are 5/16" UNF threads.

[Monty-4]

Thanks.

I just realised that these are in the thread sizes sticky, but don't show up in searches because the list is an image!